Merrytek MSA035 Z1 User Manual page 7

Instructions
1. Initialization: After power on, the indicator light flashes for 20 seconds and then
turns off. During initialization, the sensor does not communicate with the
communication module and does not detect external movement signals. After
the initialization is completed, it enters the normal working state.
2.
This product is compatible with Tuya Smart and Light + Place (by Volcano
Technology Limited) APP. Scan the QR code below to download the APPs.
Tuya Smart APP
3.
Pairing instructions: Long-press the connecting button of sensor to access the
pairing mode. Open the APP, go to Add Manually>Sensors>Motion
Detector>Motion Detector (Zigbee) and select the gateway to connect.
MSA035 Z1
1) Long press the connecting button for more than 3 seconds to enter the pairing
mode. The green indicator flashes for 1 minute to enter the network
connecting state. For batch application, you can also enter the mode by
pressing the Test (2s) button of the remote control (remote control model
MH10, please purchase separately if necessary)
2) After the device is successfully connected to the network, the LED indicator
will stay ON for 10 seconds and then OFF. If the network connection fails, the
LED indicator will flash for 10 seconds.
Light+Place APP
MSA050 Z1