Product Registration; Installation Considerations - Lexicon MC-8 User Manual

MC-8

PRODUCT REGISTRATION

Please register the MC-8 Digital Controller within 15 days of
purchase. Register online at www.lexicon.com or complete and
return the product registration card attached to the back cover of
this user guide. Retain the sales receipt as proof of warranty
coverage.

INSTALLATION CONSIDERATIONS

The MC-8 requires special care during installation to ensure optimal
performance. Pay particular attention to instructions below and to
other precautions that appear throughout this user guide.
D
install the MC-8 on a solid, flat, level surface such as a table or
O
shelf. The MC-8 can also be installed in a standard 19-inch
equipment rack using an optional rack-mount kit available from an
authorized Lexicon dealer.
D
select a dry, well-ventilated location out of direct sunlight.
O
D N
expose the MC-8 to high temperatures, humidity, steam,
O OT
smoke, dampness or excessive dust. Avoid installing the MC-8 near
radiators and other heat-producing appliances.
D N
install the MC-8 near unshielded TV or FM antennas, cable
O OT
TV decoders, or other RF-emitting devices that might cause
interference.
D N
place the MC-8 on a thick rug or carpet, or cover the
O OT
MC-8 with a cloth, as this might prevent proper cooling.
D N
OT place the MC-8 on a windowsill or any location exposed
O
to direct sunlight.
D N
OT obstruct the front-panel IR receiver window. The remote
O
control must be in line of sight with the IR receiver for proper
operation.
D N
O OT install the MC-8 on a surface that is unstable or unable to
support all four feet.
D N
O OT stack the MC-8 directly above heat-producing equipment
such as a power amplifier.
CAUTION!
Before moving the MC-8, power the unit off using the
rear-panel power switch and unplug the power cord from
the wall outlet.
Getting Started
1-5