Lexicon MC-8 User Manual page 101

MC-8
ON-SCREEN DISPLAY SETUP
SETUP DISPLAYS
ON-SCREEN DISPLAY
Opens the ON-SCREEN DISPLAY menu, which is used to customize the on-screen display.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
Parameter Default Setting Possible Settings
STATUS 2 SECONDS
POSITION TOP
FORMAT NTSC
BACKGROUND ON
REMOTE STATE ON
SETUP DISPLAY SETUP
INPUTS ON-SCREEN DISPLAY
SPEAKERS FRONT PANEL DISPLAY
REAR PANEL CONFIG A/V SYNC DELAY
DISPLAYS CUSTOM NAME
VOLUME CONTROLS EDIT CUSTOM NAME
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
ALWAYS ON, 2 SECONDS,
ALWAYS OFF
TOP, CENTER, BOTTOM
SECAM, PAL, NTSC
ON, OFF
ON, OFF
ON-SCREEN DISPLAY
STATUS 2 SECONDS
POSITION TOP
OFF FORMAT NTSC
OFF BACKGROUND ON
REMOTE STATE ON
ON
OFF
STATUS
ALWAYS ON, 2 SECONDS, ALWAYS OFF
SETUP DISPLAYS ON-SCREEN DISPLAY
Activates and deactivates the on-screen display sent to the Main Zone
video output connector. When set to ALWAYS ON, the on-screen display
remains on at all times. When set to 2 SECONDS, the on-screen display
appears for 2 seconds whenever the input source changes or the MC-8
receives a command. When set to ALWAYS OFF, the on-screen display
remains off at all times. It will not reappear until the ON-SCREEN
DISPLAY menu STATUS parameter is set to ALWAYS ON or 2 SECONDS.
Note:
When the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS
OFF, the on-screen display immediately disappears. Press the remote
control OSD button or use the front-panel display as a guide to reset the
parameter to ALWAYS ON or 2 SECONDS.
Setup
ALWAYS ON
2 SECONDS
ALWAYS OFF
TOP
CENTER
BOTTOM
SECAM
PAL
NTSC
STATUS
3-63