Setup
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
CUSTOM NAME
SETUP
DISPLAYS
CUSTOM NAME
Activates the display of a custom unit name, which appears when the
MC-8 is activated. When set to ON, the custom name scrolls across
the on-screen and front-panel displays when the MC-8 is activated.
When set to OFF, the custom name does not appear when the MC-8
is activated. The custom name can be entered in the DISPLAY SETUP
menu EDIT CUSTOM NAME menu.
EDIT CUSTOM NAME
SETUP
DISPLAYS
EDIT CUSTOM NAME
Opens the EDIT CUSTOM NAME menu shown below, which can be
used to create a custom unit name. When the CUSTOM parameter is
set to ON, the custom unit name appears in the on-screen and front-
panel displays when the MC-8 is activated.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
3-62
SETUP
DISPLAY SETUP
ON-SCREEN DISPLAY
INPUTS
FRONT PANEL DISPLAY
SPEAKERS
A/V SYNC DELAY
REAR PANEL CONFIG
CUSTOM NAME
DISPLAYS
EDIT CUSTOM NAME
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
To customize the name of the MC-8:
ON, OFF
1. Follow the EDIT CUSTOM NAME menu path to open the EDIT
CUSTOM NAME drop-down menu shown below.
2. When the EDIT CUSTOM NAME drop-down menu opens, press
the remote control
character above the cursor (^).
3. When the desired character has been selected, press the
button to advance to the next character space. The cursor will
automatically wrap to the first character space when the last
character space is passed.
4. Repeat steps 2 and 3 to enter the desired custom unit name.
5. When the desired custom unit name has been entered, press the
menu and return to the DISPLAY SETUP menu.
SETUP
DISPLAY SETUP
ON-SCREEN DISPLAY
INPUTS
FRONT PANEL DISPLAY
SPEAKERS
A/V SYNC DELAY
REAR PANEL CONFIG
CUSTOM NAME
DISPLAYS
EDIT CUSTOM NAME
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
LIVE! CALIBRATION
ON
OFF
OFF
OFF
and
arrow button to close the EDIT CUSTOM NAME drop-down
EDIT CUSTOM NAME
MC-8
∧
OFF
BUTTONS TO EDIT
OFF
UP TO 20 CHARACTERS
BUTTON TO ADVANCE
Lexicon
arrow buttons to change the
arrow
Need help?
Do you have a question about the MC-8 and is the answer not in the manual?