Printing The Pictures - Leica V-LUX 2 Instructions Manual

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera's LCD monitor.
•
Picture series will be displayed as a list, and not as a group.
•
Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the internal memory.
Perform the print quality and other settings at the printer before printing the pictures.
MIC
REMOTE
A USB connection cable (supplied)
•
Make sure the plug is aligned correctly and that it is inserted straight. (Otherwise the
connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
•
Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the printer are connected, the alarm beeps. If this happens during printing, stop
printing at once. If not printing, disconnect the USB connection cable.
Connect the camera to a printer via the USB connection cable A
(supplied).
•
When the camera is connected to the printer, the cable disconnect prohibit icon [å]
appears. Do not disconnect the USB cable while [å] is displayed.
Press 3/4 to select [PictBridge(PTP)], and then
press [MENU/SET].
Connecting to other equipment
- 195 -
USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
SELECT SET MENU