[Version Disp.]/ [Format]/ [Language]; [O.i.s. Demo] - Leica V-LUX 20 Instructions Manual

Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu (→18)
Item
Current version is displayed.
[VERSION DISP.]
Checks the version of the
camera firmware.
[YES]/[NO]
[FORMAT]
• This requires a sufficiently charged battery (→10). When
Use when [BUILT-IN
formatting the built-in memory, remove the cards.
MEMORY ERROR]
(Only inserted card will be formatted if present; built-in
or [MEMORY CARD
memory will be formatted if no card is inserted.)
ERROR] appears, or
• Always format cards with this camera.
when formatting the built-
• All picture data including protected pictures will be
in memory or card.
deleted. (→125)
• Do not turn off power or perform other operations during
When a card/the built-in
formatting.
memory is formatted,
• Formatting the built-in memory may take several
the data cannot be
minutes.
restored. Check the
• Consult your nearest Leica service facility (→165) if
content of the card/
formatting cannot be successfully completed.
built-in memory
carefully before
formatting.
Set the language displayed on the screen.
[LANGUAGE]
Changes display
language.
26
(Continued)
Settings, notes
For details about the setting procedure in the [SETUP] menu (→18)
Item
Extent of camera shake effect is shown on graph

[O.I.S. DEMO]

(estimate)
Shows demonstration of
Large ← Small → Large
functions.
(Only during recording)
• During demo screen display, the Optical Image Stabilizer
switches ON and OFF every time [MENU/SET] is
pressed.
• Cannot be displayed during playback mode.
• To stop→ Press the [DISPLAY] button.
• Recording and zoom cannot be performed during demo.
Settings, notes
Extent of camera shake effect
Extent of camera shake effect after
correction
27