Useful features for travel
∗
Recording Mode:
If you set your travel schedule and record pictures, which day of your trip the picture was
recorded will be recorded.
Set-up:
• Clock must be set in advance (→15).
Select [TRAVEL DATE] from
the [TRAVEL MODE] menu
(→18)
Select [TRAVEL SETUP]
Select [SET]
Set the departure date
●
The number of days elapsed is displayed for approx. 5 sec. when switching from
Playback to Recording Mode or when power is turned on. (
of screen)
●
The travel date is calculated from the set departure date and the date set in the
camera's Clock. When destination is set in [WORLD TIME], days elapsed are
calculated based on local destination time.
●
The set travel date is saved even when the camera's power is turned off.
●
When [TRAVEL SETUP] is set to [OFF], the number of days elapsed is not recorded. It
is not displayed even if [TRAVEL SETUP] is set to [SET] after recording.
●
If settings are made before the departure date, the number of days to departure are
displayed in orange with a minus sign (but not recorded).
●
When [TRAVEL DATE] is displayed in white with a minus sign, the [HOME] date is one
day in advance of the [DESTINATION] date (this is recorded).
●
To print the number of days that have passed, use [TEXT STAMP].
84
[TRAVEL MODE]
∗
∗
Recording only. (Cannot be set.)
[TRAVEL DATE]
Set the return date in the
same way
• The color of the date frame from the
departure date to the return date
changes.
Close the menu
■
Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step
.
• If [TRAVEL SETUP] is turned [OFF],
[LOCATION] is also automatically turned
[OFF].
displayed at bottom-right
[LOCATION]
Record your destination.
Once the [TRAVEL SETUP] is set, you can set the destination.
Select [LOCATION] in step
on the previous page
Select [SET]
■
To clear
In step
, select [OFF] and press [MENU/SET]
●
If [TRAVEL SETUP] is recorded, [LOCATION] is recorded at the same time.
●
It is recorded separately from the place name information recorded for pictures by the
[GPS SETTING].
●
To print the destination, use [TEXT STAMP].
Enter your destination
• Entering text (→105)
Close the menu
85