Advertisement
Quick Links
FontanaShowers
FontanaShowers
©
©
Product code: FS9086-SD
WALL MOUNT COMMERCIAL AUTOMATIC SOAP DISPENSER
IN ANTIQUE BRASS FINISH INSTALLATION INSTRUCTIONS
PRIOR TO INSTALLATION
Please read installation instructions below. All plumbing should be
installed in accordance with applicable building codes and regulations.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
All products must be installed by a professional and certified plumber
otherwise warranty may be voided.
POSSIBLE TOOLS REQUIRED*
Level
Plumbers Tape
Tape Measure
Adjustable Wrench
Hex Wrench
Thread Sealant
Pencil or Marker
Screwdriver
Drill
*not included
fontanashowers.com
FontanaShowers
FontanaShowers
1
Customer Service: 800-684-4489
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fontana Showers FS9086-SD
Summary of Contents for Fontana Showers FS9086-SD
- Page 1 FontanaShowers FontanaShowers © © Product code: FS9086-SD WALL MOUNT COMMERCIAL AUTOMATIC SOAP DISPENSER IN ANTIQUE BRASS FINISH INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION Please read installation instructions below. All plumbing should be installed in accordance with applicable building codes and regulations.
- Page 2 FontanaShowers FontanaShowers © © Wall Mount Installation fontanashowers.com FontanaShowers FontanaShowers Customer Service: 800-684-4489...
- Page 3 FontanaShowers FontanaShowers © © Installation of Soap Bottle Install the bracket Insert the pump Insert the locking on the wall onto the bracket plate into bracket Soap Refill Process Affix the bottle with Unscrew the Add soap into full soap onto the pump, empty bottle.
- Page 4 FontanaShowers FontanaShowers © © Deck Mounted Faucet Battery Box Battery case Battery case cover － ＋ Screws ＋ － Batteries fontanashowers.com FontanaShowers FontanaShowers Customer Service: 800-684-4489...
- Page 5 FontanaShowers FontanaShowers © © 1. Remove cover of battery case. 2. Install four (4) D size alkaline batteries. Anode Cathode Note: Make sure the batteries are installed in correct orientation (polarity). 3. Replace battery case cover. 4. Tighten screws. The standard life cycle time is 2 years, based on average use 2000 times/month. Usage Place hands immediately Predetermined amount...
-
Page 6: Operation
FontanaShowers FontanaShowers © © Commissioning Sequence Care & Cleaning Before using the soap dispenser for the first time, • Always wipe your fixture down with a soft cloth the following sequence must be carried out. after each use to prevent mineral build-up and - Fill the bottle full of soap.
Need help?
Do you have a question about the FS9086-SD and is the answer not in the manual?
Questions and answers