Hollyland Solidcom C1 Pro Quick Manual page 17

Operation
Hub Upgrade
Note: You can obtain the firmware upgrade file from Hollyland's official website or by
contacting Hollyland online technical engineers.
1. Use a standard RJ45 Ethernet cable to connect the Hub to your computer.
2. Set your computer's IPv4 information to be on the same subnet as the Hub, open
the default browser, and enter the Hub's IP address to navigate to the login page.
3. Enter the default username admin and password 12345678 or your custom
username and password to log in, click Other > Settings to jump to the upgrade
page, upload the firmware file, and click Upgrade to initiate the upgrade process.
Ethernet Cable
17