Konica Minolta Magicolor 5550 Reference Manual page 236

Item
Tray Chaining
Tray Mapping
Apply button
218
Description
Tray Chaining If Enable is selected and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is selected and the specified
paper tray runs out of paper, printing
stops.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
Tray Mapping Select whether or not the Tray Mapping
Mode function is used.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
Logical Tray Select the tray that is used for printing
0-9 when a print job is received from another
manufacturer's printer driver.
The default setting for LogicaL Tray 1 is
Physical Tray1. The default setting for all
other trays is Physical Tray2.
Choices: Physical Tray1, Physical Tray2,
Configuration Menu Equivalent:
Applies the configuration settings for this
window.
PAPER MENU - PAPER
SOURCE - TRAY CHAINING
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
- TRAY MAPPING MODE
Physical Tray3, Physical Tray4
PAPER MENU - PAPER
SOURCE - TRAY MAPPING
- LOGICAL TRAY0-9
Physical Tray3 and Physical Tray4
appear only if an optional lower
feeder unit is installed.
Configuring the Printer