Accessing the Ethernet Menu
Use the following series of keystrokes at the printer to access the Ethernet
menu options on your printer. This menu provides access to all of the config-
urable network items.
Press this
key . . .
Restart the printer if any of the following Ethernet settings are
changed.
TCP/IP - ENABLE
DHCP (Only when changed from OFF to ON)
BOOTP (Only when changed from OFF to ON)
ARP/PING (Only when changed from OFF to ON)
IPP - ENABLE
SLP - ENABLE
SNMP - ENABLE
IPv6 - ENABLE
IPv6 - AUTO SETTING (Only when changed from NO to YES)
98
(until) the message window reads. . .
PROOF/PRINT MENU
or if no optional hard disk kit is installed:
PRINT MENU
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP
Ethernet Menu