Accessing the Ethernet Menu
Use the following series of keystrokes at the printer to access the Ethernet
menu options on your printer. This menu provides access to all of the config-
urable network items.
Press this
key . . .
The printer automatically reboots when the following Ethernet settings
are changed:
TCP/IP - ENABLE
DHCP (OFF→ON)
BOOTP (OFF→ON)
ARP/PING (OFF→ON)
IPP - ENABLE
SLP - ENABLE
SNMP - ENABLE
IPv6 - ENABLE
IPv6 - AUTO SETTING (NO→YES)
Ethernet Menu
(until) the message window reads. . .
PROOF/PRINT MENU
or if no optional hard disk kit is installed:
PRINT MENU
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP
149