Konica Minolta Magicolor 2450 Reference Manual page 176

Item
Submit button
Reset button
Save Custom button
Restore Custom button Changes all settings to the Custom values.
Restore Factory button Changes all settings to the Factory values.
160
Description
Font Num- Identifies the PCL font number.
ber Range: Up to 5 characters (0 - 32767)
Default: 0
Configuration Menu Equivalent:
Point Size Controls the height (in points) of the default font.
Range: Up to 5 characters (4.00 - 999.75)
Default: 12.00
Configuration Menu Equivalent:
Symbol Sets the symbol set to be used.
Set Default: PC8
Configuration Menu Equivalent:
Saves and applies any changes made.
If you made changes to any of the parameter set-
tings but don't wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
MENU SYSTEM DEFAULT/
EMULATIONS/PCL/FONT/FONT
NUMBER
MENU SYSTEM DEFAULT/
EMULATIONS/PCL/FONT/POINT
SIZE
MENU SYSTEM DEFAULT/
EMULATIONS/PCL/FONT/SYMBOL
SET
Configuring the Printer