Konica Minolta Magicolor 2450 Reference Manual page 111

Default Router
Purpose
Range
Default
Subnet Mask
Purpose
Range
Default
Enable HTTP
Purpose
Range
Default
Enable Auto IP
Purpose
Range
Default
Ethernet Menu
Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
000.000.000.000
Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
000.000.000.000
Specify whether or not HTTP is used.
YES
NO
YES
Select whether or not the IP address is automatically
acquired when DHCP/BOOTP and PING, ARP are not
functioning or when there is no response.
YES
NO
NO
95