Netware 4.X/5.X Setup; Setup Overview; Netware Nds Setup Using Pconsole (Detailed Setup) - Konica Minolta Crown II Software Manual

NetWare 4.x/5.x Setup

This chapter describes the steps necessary to configure NetWare 4.x/5.x and your Crown II printer to
print jobs routed through a print server.

Setup Overview

See the sections following this overview for detailed setup instructions.
Using PCONSOLE (NetWare 4.x only) or NWAdmin (NetWare 4.x/5.x)
1
Add a Print Server to the NDS tree.
2
Add a Print Queue to be serviced.
3
Add a Printer with the type as Remote/Other Unknown.
4
Associate the Print Queue with the Printer.
5
Associate the Printer with the Print Server.

NetWare NDS Setup Using PCONSOLE (Detailed Setup)

1
From any network workstation, log in with admin privileges to the file server that you want to
service the printer.
2
Start the NetWare PCONSOLE utility. If needed, use the Change Context option to position
yourself in the proper place within the NDS tree to install your print server.
3
From the Available Options menu, choose Print Servers, and then press Enter.
4
To create a new print server, press Ins[ert].
5
Type the name of the new print server, and then press Enter.
This name should match the latter portion of the name entered on the interface card. Refer
to"Crown II Printer Interface Setup" on page 45.
6
Choose Print Server, and then press Enter.
7
Select Printers from the Print Server Information menu.
8
Press Ins[ert] at the Serviced Printers screen.
40
NetWare 4.x/5.x Setup