Table of Contents
Advertisement
4
Connect the two transformer boxes with the telephone cable.
5
Put terminating resistors in all open sockets in
the connector boxes.
This ensures proper communication and helps
speed up transmission.
6
Turn on the printer.
Configuring the Printer's LocalTalk Interface
1
From the printer's control panel, make sure that the setting in the
Administration/Communications/LocalTalk/Mode is Enabled.
This setting enables the LocalTalk interface, which allows the printer to accept communication
through its LocalTalk port.
2
When finished, save changes and put the printer back online.
Installing PPD Files
1
Insert the KONICA MINOLTA Software Utilities CD-ROM.
PPDs are also available on our website at printer.konicaminolta.net/support.
2
Double-click the KONICA MINOLTA icon when it appears on the desktop.
3
Double-click the Install icon.
4
Select the Read Me... button to view information about PPDs and utilities on the Software
Utilities CD-ROM.
Close the read me file after reading the information.
5
From the Process Location drop-down list box, choose the disk where you want to install the
software.
To change the install location, use the drop-down list box to display and choose the appropriate
disk.
6
Select Continue.
7
Choose the Crown II printer you are installing when prompted, and select Continue.
PPD files are automatically placed in the proper folder.
8
When the installation is complete, select Quit.
9
Remove the Software Utilities CD-ROM from your CD-
ROM drive and store it in a safe place.
10
Customize the printer description (PPD) as described in
the next section.
Installing PPD Files
Host
DIN-8 Female Port
Transformer
Boxes
RJ-11 Cable
Terminating
Resistors
Printer
DIN-8 Female Port
33
Advertisement
Table of Contents
