Kodak DC4800 User Manual page 93

Camera
Problem
Picture is not clear.
Slide show does not
run on external video
device.
Slide show does not
run on LCD screen.
80
Cause
The lens is dirty.
Subject too close
when taking
picture
Subject or the
camera moved
while the picture
was taken.
The subject is too
far away for the
flash to be effective.
Video-Out setting is
incorrect.
Power Save is on.
Solution
Clean the lens. See Appendix.
Stand at least 1.6 ft (0.5 m) in
Wide angle, 3.3 ft (1 m) in
Telephoto.
Hold camera steady until the
picture is taken.
Move so the subject is less than
10 ft (3.0 m) away.
Adjust the camera Video-Out
settings (NTSC or PAL). See
page 57.
Turn off Power Save feature.
See page 52.
Use AC adapter to save battery.