Kodak DC4800 User Manual page 92

Camera
Problem
Picture is too light.
Stored pictures are
damaged.
Pictures remaining
number does not
decrease after taking a
picture.
Cause
The flash is not
needed.
The subject is too
close when the
flash was used.
The light sensor is
covered.
The Exposure
Compensation is
set incorrectly.
The Picture Card
was removed when
the Picture Card
access light was
blinking.
Image Resolution
and Quality settings
do not take up
sufficient space to
decrease the
picture remaining
number.
Solution
Change to Auto flash. See
page 25.
Move so there is at least 1.6 ft
(0.5 m) between the camera
and the subject.
Hold the camera so your hands
or other objects do not cover
the light sensor.
Decrease the Exposure
Compensation. See page 30.
Make sure the Picture Card
access light is not blinking
before removing the card.
The camera is operating
normally. Continue taking
pictures.
79