Installation And Connection - Icon Process Controls truflo UltraFlo UF-500 Series Quick Start Manual

Truflo — UltraFlo
®
Clamp-On Ultrasonic Flow Meter Sensor
Components
1
1
Sensor Body
Sensor Body

Installation and Connection

1
1
Pipe
Pipe
Make sure no dirt, paint, or other stains on
the surface of the tube. Make sure no dirt, paint, or other stains on
the surface of the tube.
Position the Lower Bracket on the pipe.
Position the Lower Bracket on the pipe.
4
4
Install Polycarbonate Cover.
Install Polycarbonate Cover.
24-0498 © Icon Process Controls Ltd.
UF-500
®
2
2
Upper Bracket
Upper Bracket
2
2
Lower Bracket
Lower Bracket
Align Upper Bracket to the pipe position.
Magnets will hold brackets in place. Align Upper Bracket to the pipe position.
Magnets will hold brackets in place.
Using the mounting screws, connect
Upper and Lower Brackets together. Using the mounting screws, connect
Upper and Lower Brackets together.
Ensure parts are snug |
DO NOT over-tighten! Ensure parts are snug |
DO NOT over-tighten!
5
5
3
3
Lower Bracket
Lower Bracket
Upper Bracket
Upper Bracket
Screw
Screw
Connect M12 Cable.
Connect M12 Cable.
4
4
M12 Cable
M12 Cable
3
Display
3
Display
Position display over Upper Bracket and
Position display over Upper Bracket and connect using the mounting screws.
connect using the mounting screws.
DO NOT over-tighten!
DO NOT over-tighten!
6
6
Wiring Diagram
Wiring Diagram
DC+
Brown
DC+
Brown
DC-/4-20mA-
Black
DC-/4-20mA-
Black
Gray 4-20mA+
Gray 4-20mA+
RS485 A
Blue
RS485 A
Blue
RS485 B
White
RS485 B
White
Shield
Shield
Option
Option
OCT+
OCT+
OCT-
OCT-
6