InFocus ScreenPlay 8602 User Manual page 31

contains captions on the selected channel, then the projector must display
caption text overlaid on the image.
Ceiling Mount: Turns the image upside down for ceiling-mounted projection.
Rear Project: Reverses the image so you can project from behind a
translucent screen.
Prevent PC Screen Saver: Prevents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Search Screen: Allows you to display one of the following options instead of
the default screen at startup, and when no source is detected. Options
include the factory logo screen, a custom Snapshot, or a blue, black or white
screen.
Take Snapshot...: Captures the current image and allows it to be used as the
search screen image.
Disable Snapshot: Allows the user to disable the snapshot capability.
Show Messages: Displays status messages (such as "Searching") in the lower-
left corner of the screen.
Menu Offset: Allows you to change the position of the On Screen Display
items.
Menu Transparency: Allows you to change how much of the projected image
behind the menu you can see. As the value increases, more of the image
behind the menu is visible.
Magnify Controls: Allows you to change the function of the arrow buttons
when the menu is not shown. By default, the arrow buttons allow you to
advance slides while in PowerPoint's SlideShow mode. To make the arrow
buttons also adjust magnify settings, choose Magnify Controls to turn
magnify controls on. Now when the menu is not shown, you can press the
Select button to switch between the magnification settings (Magnify Level,
Magnify Horizontal Position and Magnify Vertical Position), then press
Select again to turn off magnify controls and use the arrow buttons to
advance slides.
Keypad Enable: Enables or disables keypad.
Glow Ring: Controls the brightness level of the glow ring status indicator.
Serial Port, Baud Rate: Selects the serial port and baud rate.
Serial Port Echo: Controls whether the serial port echoes characters.
30
Setup menu