Specifications; Approved Media - Datamax M-Class Mark II M-4206 Operator's Manual

Approved Media

To achieve optimum print quality and maximum printhead life, Datamax specifies the use of DATAMAX brand media and
ribbons. These supplies are specially formulated for use in our printers; use of non-Datamax supplies may affect the print
quality, performance, and life of the printer or its components.
For a current list of approved media and ribbons for use in direct thermal and thermal transfer applications, please contact
a Media Representative at (407) 523-5650.
Designator
A
B
C
D
E
F
G
H
I
J
K
[1]
Units of measure given in inches.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and the reflectance shall be less than 10% at
wavelengths of 950 and 640 nm.
[3]
The maximum allowable length of the combined label and gap (or mark) measurement can not exceed 99.99 inches.
M-4206
Side View
I
J
E
Description
label width
liner width
[3]
gap (or notch) between labels
[3]
label length
media thickness
notch opening width
distance from the media's edge to the media sensor
aperture (left justified)
[2]
reflective (black) mark width
distance between reflective marks
[3]
reflective mark length
[3]
label repeat distance
Top View
G
F
H
D
A
C
B
Media Dimensions
Maximum
[3]
K
[1]
Minimum
4.65 1.00
4.65 1.00
.25 .100
– .250
.0100 .0025
.500 .200
2.250 .200
4.65 .500
– .500
– .100
– .350
[1]
51