Buttons; Normal Mode - Button Functions - Datamax M-Class Mark II M-4206 Operator's Manual

4.2 Buttons

The three buttons, PAUSE ,
operational mode. The printer operates in one of the following modes:
Normal:
Normal printer functions. See Section 4.3.
Express Setup:
Allows quick access to the most common printer settings, (Sensor Type, Media Type, and Option Control. See
Section 4.4.
Printer Setup:
Allows changes to the printer's operational settings. See Section 4.5.
Calibration:
Allows the 'calibration' of the media being used for the correct sensing of the top of form. See Section 4.7.

4.3 Normal Mode - Button Functions

In 'Normal' mode, the printer's buttons control normal operations such as pause, feed, and cancel, as well as the test and
reset functions by using button combinations as detailed below.
(Normal power-up)
Normal Mode
Button Combinations (push buttons simultaneously)
PAUSE
PAUSE
FEED
M-4206
FEED , and
Pauses/Un-pauses the printer
PAUSE
Feeds one label. Clears fault conditions
FEED
Press and Hold to perform "Label Alignment", see section 4.6
Cancels the current batch of labels. Press the Pause button to
CANCEL
print the next batch of labels in the printer's buffer
+
Prints the Test Label, see Section 4.8.2.
FEED
+ Performs a warm reset and returns to the Normal Mode of operation.
CANCEL
+
Produces Database Configuration and Dot Check Labels, see Section 4.8.1
CANCEL
CANCEL perform different functions based on the printer's
17