On-Screen Display - Hitachi UltraVision L42S503 Operating Manual

On-Screen Display

1. Press MENU on the remote control to display the different
features on your Hitachi LCD TV.
2. Use the CURSOR PAD (buttons,
highlight a different feature of the On-Screen Display
menu. Press the SELECT button to select.
3. Press EXIT
exit from any menu.
This part of the screen shows which
selections are available.
Video
Picture Mode
Contrast
Audio
Brightness
Setup
Color
Tint
Channels
Sharpness
Color Temp.
Move Select
SEL
The On Screen Display (OSD) for the different submenus shown in the following pages are for illustration purposes
NOTE
only, there may be slight differences from the actual appearance of the OSD of your Hitachi LCD TV.
Video
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Noise Reduction
Auto Movie
Backlight
Aspect Ratio
Reel120
Reset
28
, ,
on the remote control
Dynamic
41
47
65
0
60
High
This part of the screen shows
EXIT Exit
Return
which Remote Control buttons
to use.
Select between 5 pictures modes; Dynamic, Standard, Movie, Custom and Game.
Adjust picture contrast.
Adjust picture brightness.
Adjust color.
Adjust tint.
Adjust sharpness.
Set this to High for less intense color with more blue, set to Medium for natural color and set to Standard for warm
colors.
Reduces conspicuous noise in the picture.
Select the 3:2 Pull down detection feature Auto/Off. For a film like picture.
Adjust to increase or decrease the brightness of backlight.
Choose the picture format aspect ratio.
Adjust the movie motion to smooth or original.
Choose to Reset Video Settings to factory settings.
and ) and
to quickly