Input Switching; Input Signal Screen Display - Hitachi ULTRAVISION UT32S402 Operating Manual

BASIC OPERATION (continued)

Input Switching

Press the button to access the INPUTS menu. Use the CURSOR
and OK buttons to scroll and select the inputs that are being used.
Pressing the INPUT button repeatedly will also cycle through the Inputs
menu items. Then press the
AIR/CABLE Select between Air or Cable signal.
INPUT 1 Select to choose Input 1.
INPUT 2 Select to choose Input 2.
INPUT 3 Select to choose Input 3.
INPUT 4 Select to choose Input 4
HDMI 1 Select to choose HDMI 1 Input.
HDMI 2/DVI Select to choose HDMI 2/DVI Input.
HDMI 3 Select to choose Side HDMI Input.
Press RGB button to enter to RGB Mode, Press HDMI to return to A/V Center Mode.

Input Signal Screen Display

The input signal status can be displayed on the screen by pressing the
The display will go out in approximately 6 seconds.
HDMI mode
YPbPr
Component
mode
Video
Composite
mode
RGB mode
Alternate Rating
Air/Cable
Show Name
Program
mode
Information
3:00PM-3:30PM
Broadcast
Closed Caption
Show Name
Program
Information
3:00PM-3:30PM
ST
Audio
Broadcast
Closed Caption
and buttons to select.
◄►
OK
HDMI: 1
DVI
720p
YPbPr:3
480p
Input:1
RGB
H : 48.4kHz
V : 60.0 Hz
DIGITAL CHANNELS
REGION 5
ST DTvCC TV-G 1080i
Digital Picture
Broadcast
Audio
Captions Format
Rating
Auto
Setting
ANALOG CHANNELS
A
TV-G 480i
Broadcast Picture Format
Rating
Auto STEREO
Audio Source
Setting
Selection
Input Select
button
HDMI 2/DVI
HDMI 3
Air/Cable
Input 1
Input 2
Move OK Select
button on the remote control.
Input mode
*
Signal mode
* When DVI
is detected
Input mode
Signal mode
Input mode
Input horizontal
frequency
Input vertical
frequency
Digital Channel
Main Picture Source
& Channel Indication
Air 15-1
D
Broadcast Channel
KPBS-HD
Indication
3:25 PM
Clock
Analog Channel
Main Picture Source
& Channel Indication
Air 8
Broadcast Channel
KXYZ
Indication
3:17 PM
Clock
NOTE
For Digital Channels press the
INFO button again for a more
detailed description of program.
Press the INFO button again to
return to normal viewing.
The Aspect setting will not be
shown if the channel is locked.
INFO
button
26