Rear Panel Connections - Hitachi UltraVision L42S503 Operating Manual

Rear Panel Connections

Outside antenna
or
Cable TV coaxial cable
2-Way
signal
splitter
VCR
ANT
IN V
NOTE
Cables are not included.
TIPS ON REAR PANEL CONNECTIONS
♦ COMPONENT Y-PbPr (COMPONENT 1 & 2) or HDMI (1 & 2) connections are provided for high performance DVD players, VCRs etc.
that have this feature. Use these connections in place of the standard video connection if your device has this feature.
♦ If your device has only one audio output (mono sound), connect it to the left audio jack on (L) the Rear Panel.
♦ Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
♦ Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
♦ Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's Pb input and the
components R-Y output to the TV's Pr input.
♦ Your component outputs may be labeled Y-CbCr. In this case, connect the components Cb output to the TV's Pb input and the
components Cr output to the TV's Pr input.
♦ It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PbPr inputs. (See page 30).
♦ When using a HDMI input from a Set-Top-Box, it is recommended to use a 1080p, 1080i or 720p input signal.
♦ When the HDMI input is a 1080p signal, it is recommended that the length of the cable should be less than 5 meters.
NOTES • Completely insert all connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back
will be abnormal if the connection is loose.
• Cable plugs are often color-coded. Match colors of plugs and terminals, i.e. connect red to red, white to white, etc.
Connecting a Personal Computer PC .
Use the RGB PC connection terminal and the Analog
Audio Input terminals to connect the PC.
Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
Fabriqué sous licence de Dolby Laboratories. Le terme « Dolby »
(D-sub 15 Pin) and AUDIO
1. Connect the RGB
et le sigle double D sont des marques commerciales de Dolby
Laboratories.
cable from the RGB and AUDIO OUT jack of the
TruSurround HD, SRS and
PC to the RGB and AUDIO jack, as shown on the
symbol are trademarks of SRS
Labs, Inc.
Rear Panel on the right.
2. Press the INPUT button, then select RGB from the
INPUTS menu to view the signal from the PC.
L R
Y
OPTICAL
IN
HDTV SET-TOP BOX
STEREO SYSTEM
AMPLIFIER
with Component
Output capability
OUTPUT
OUTPUT
S-Video Video
P /C P /C L R
B B R R
DVD PLAYER
VIDEO GAME
DVD PLAYER
with Composite
video capability
RGB
HDMI
DIGITAL OUTPUT
to
DVI
OUTPUT CAPABILITY
RGB
HDMI
to
HDMI
OUTPUT CAPABILITY
RGB
L R
Personal Computer
IN
or
(Audio)
(D-sub 15 Pin)
AUDIO OUT
HDMI DIGITAL
HDMI OUTPUT
DIGITAL
OUT
[PC sample]
15