Menu Button; Info Button - Hitachi UltraVision L42S503 Operating Manual

How to Use the Remote to Control your TV
Closed Captioning will display automatically when MUTE is on
and Closed Caption is set to With Mute (see page 36).
When the TV power is turned off at a volume level 21 or greater,
the volume level will default to 20 when the TV is turned on.
However, if it is set to a level 20 or less, the volume level will
be at the level it was set when the TV is turned off.

MENU button

The MENU button will start the On-Screen Display.
EXIT button
This button will exit all On-Screen Displays.
CURSOR Pad /SELECT button
All the On-Screen Display features can be set or adjusted
by using the CURSOR Pad and the SELECT button, except
for numeric entries. Press the CURSOR Pad toward desired
direction and press the SELECT button to select.

INFO button

Press this button when you want to check the channel being
received, the picture source, if the channel has stereo (ST) or
second audio program (SAP), the time, and CHANNEL ID.
ANALOG CHANNELS
INFO
No Program Title.
No Program Description.
Program Information
DIGITAL CHANNELS
INFO
Sesame Street
Program Description.
Program Information
VIDEO INPUTS
INFO
No Program Title.
No Program Description.
Program Information
Main Picture Source
ATV
& Channel Indication
39-0
Broadcast Channel
NBC Indication
3:17PM
Clock
Broadcast Rating
TV-G
Analog Audio Broadcast
Stereo+SAP
Analog Channel
Main Picture Source
DTV
& Channel Indication
15-1
Broadcast Channel
Indication
KPBS-HD
3:17PM Clock
3:00PM- 3:30PM
Broadcast Rating
TV-G
Audio Broadcast
1080i Multi
Program Picture Format
Run Time
Main Picture Source
HDMI
3:17PM
Clock
1080i
Picture Format
NOTES • Press the INFO button again or the EXIT button to
return to normal viewing.
• The Aspect INFO will not be shown when the INFO
key is pressed.
GUIDE button
Press this button to access the Channel Guide of your Satellte
receiver, Set Top Box or Cable Box while in SAT/CBL mode.
INPUT button
Press this button to access the INPUTS menu. Use the CURSOR
and SELECT buttons to scroll and select the inputs that are being
used. Pressing the INPUT button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT button or wait 4
seconds to automatically select the highlighted input.
+
Input List
0. TV 0. TV
1. AV1
2. AV2
3. Component1
4. Component2
5. RGB
6. HDMI 1
7. HDMI 2
8. HDMI 3
9. HDMI 4
Move
0. TV Watch TV from an Air or Cable signal.
1. AV1 Select to choose AV1 Input
2. AV2 Select to choose AV2 Input.
3. Component1 Select to choose Component Input 1.
4. Component2 Select to choose Component Input 2.
5. RGB Select to choose PC input.
6. HDMI 1 Select to choose HDMI 1 Input.
7. HDMI 2 Select to choose HDMI 2 Input.
8. HDMI 3 Select to choose Side HDMI 3 Input.
9. HDMI 4 Select to choose Side HDMI 4 Input.
+
Input List
Select
SEL
19