Hitachi UltraVision L42S503 Operating Manual page 37

Setup
HDMI-CEC
Set to ON and this feature will enable the HDMI-CEC signal
bus to allow your Hitachi LCD TV to discover and communicate
automatically with other compatible HDMI-interfaced Audio/Video
equipment. The CEC signal bus makes global controls possible,
based on "plug & play" automation, to minimize the number of IR
remotes and key-presses required for basic operation of your AV
system. Select OFF to disable this option.
Video
Energy Options
Transparency
Audio
HDMI - CEC
Setup
Input Labels
Component Options
Channels
RGB Options
Reset AV & Setup
Move SEL Select
Video
CEC Enable
Device Auto Off
Audio
TV Auto On
Setup
Channels
Move Select
SEL
With the "HDMI-CEC" feature, you can interface the connected
equipment through the HDMI terminal automatically if the connected
equipment meets the"HDMI CEC (Consumer Electronics Control)"
industry standard. Please check if the connected equipment
supports HDMI CEC before using this feature. For example, here
are three common functions when HDMI CEC is set to ON.
Feature Description
One-Touch Play Pushing the "Play" button on the CEC enabled device will
(TV Auto On) command the device to play , turn the TV on, and the HDMI
input, that the device is connected to, will become the active
input source for the TV.
System Standby When the user turns off the TV, all active CEC enabled
(Device Auto Off) devices on the HDMI input will go to Standby.
Playback Control The user can operate the CEC enabled device's deck
control functions (i.e. Play, Stop,Fast Forward and Rewind)
by the TV's remote control's transport keys (ie.
and 8
).
Not all devices with an HDMI connection have the
NOTE
CEC feature. Consult the instruction manuals for the
device you are trying to control to confirm whether or
not CEC is available.
0
EXIT Exit
Return
On
On
On
EXIT Exit
Return
4,<,7
Input Labels
Use this feature to give a name to any of the nine video inputs
excluding the TV input.
Video
Energy Options
Transparency
Audio
HDMI - CEC
Setup
Input Labels
Component Options
Channels
RGB Options
Reset AV & Setup
Move Select
SEL
1. Press the CURSOR PAD ▲ or ▼ to highlight the Inputs labels.
2. Press the CURSOR PAD ► to select your choices.
Video
Input
Audio
Name
Setup
Select
Channels
Move Select
SEL
The Input labels is Grayed out (Skip) or disabled until
NOTE
you are on the INPUT that you like to change.
Then the Custom option is selected a KEYBOARD will
appear on the screen to place your desired label.
Component Options
This function allows you to adjust the phase between your TV and
the Device with component output.
Video
Energy Options
Transparency
Audio
HDMI - CEC
Setup
Input Labels
Component Options
Channels
RGB Options
Reset AV & Setup
Move Select
SEL
1. Press the CURSOR
Component Options.
2. Press the CURSOR PAD ► to select your choice.
There are two options for the Component inputs:
Phase: Use this feature to fine-tune the display to perfectly
synchronize with the video signal source.
Reset: Return to the original condition for Component inputs.
0
EXIT Exit
Return
HDMI 1
HDMI 1
Default
Save
0
Reset
EXIT Exit
Return
0
EXIT Exit
Return
PAD ▲ or ▼ to highlight
37