NewLine Q Series How-To Manual

Newline Front Buttons
& Powering ON
Home Screen
Important Features
• Files
• Whiteboard
• Input
HOW-TO GUIDE
 Your board will have a remote and a pen
 The front buttons are either located on the front left
corner or font right corner depending on the model of
your Newline board.
 The device input ports are located on the left side of the
board and in the front left lower corner of the board.
 Power on Newline by pressing the power button, then click
the Owner icon and enter password (Typically 000000 or
111111)
 The 6-pack area is on the left. Some of these icons in the
six pack will not be useful to you.
o For example, the Newline browser/PC button will
o The Screencast button will allow you to screen cast
o Files can be very useful to you. This is where your
o Whiteboard can be a very useful app as well. We'll
 Staff can edit the home screen 6 pack by long pressing the
square to edit, remove, rename.
 Notice the preview window on the right and how you can
see your computer is hooked up to the HDMI 1 or 2 port.
Select the option that is highlighted to see a preview of it.
Select it again to make it full screen.
open the pc built into the board. You will want to
use the input that opens your teacher computer
instead.
a device to the board but does not work great if
you are planning to play videos. Instead, we
recommend you simply use an HDMI cable to
connect other devices to your board using the
device input ports on the front.
screenshots will be saved. You can also plug a USB
flash drive into one of the USB ports in the front
and transfer files to and from the board and your
USB stick. Click the three dots next to the file
name and select Move.
discuss it at more length later.