HP 610 Reference Manual page 48

hp digital copier series
42
2
After the carriage stops moving, press the gray button to release the
ink cartridge, then pull it up and out of its slot.
Caution! To avoid damaging the copier, remove an ink
cartridge only when a replacement is available. If an ink
cartridge is removed without being replaced:
– Close the print carriage and the print-carriage access door.
– Replace the ink cartridge within 24 hours.
– Never remove an ink cartridge and a printhead at the same time.
3
Remove the new ink cartridge from its packaging and, being careful
to touch only the black plastic, gently remove the plastic tape.
Caution! Hold the cartridge away from you as you remove
the plastic tape so the ink does not spill on you or your
clothing.
Caution! Do not touch the copper contacts.
4
Push the new ink cartridge firmly down into the appropriate slot until it
clicks into place.
Note the color bars on the print carriage.
The ink-cartridge label should be face-up after the cartridge is
inserted.
maintain your hp digital copier