Papers To Avoid; Tips For Loading Other Types Of Paper In The Main Tray - HP 610 Reference Manual

hp digital copier series

papers to avoid

tips for loading other types of paper in the main tray

paper
HP papers
Legal-size paper
12
We do not recommend the following papers:
• Any size paper other than letter, A4, or legal
• Banner paper
• 4 x 6 Photo Paper
• Paper heavier than 24 lb. (135 gsm) or lighter than 16 lb. (60 gsm)
• Paper with perforations
• Photo paper other than HP Photo Papers
• Envelopes
• Transparency film other than HP Premium
• Heavyweight paper other than HP Premium
• Multiple-part forms or label stock
The following table provides guidelines for loading certain types of paper
and transparency film. For best results, adjust the paper settings each time
you change paper types and paper sizes. For more information, see choose
the paper tray and set the paper type on page 13.
tips
• HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting
side of the paper, and then insert paper with the arrow side facing up.
• HP Premium or Premium Plus Photo Paper: Load the glossy (print) side
down. Always load at least five sheets of regular paper in the main
tray first, and then place the photo paper on top of the regular paper.
• HP Premium Inkjet Transparency Film: Insert the film so that the white
transparency strip (with arrows and the HP logo) is on top and is
going into the tray first.
• HP Iron-On T-shirt Transfers: Flatten the transfer sheet completely
before using it; do not load curled sheets. (To prevent curling, keep
transfer sheets sealed in the original package until you are ready to
use them.) Manually feed one sheet at a time, with the unprinted side
facing down (the blue stripe faces up).
• HP Greeting Cards, Glossy Greeting Cards, or Textured Greeting
Cards: Insert a small stack of HP greeting-card paper, with the print-
side down into the main tray until it stops.
Fully extend the paper-length guide and make sure that the main tray is
pushed in all the way.
load originals and paper