There are two methods to playback video files on a memory source.
Note: make sure the desired memory source is selected (see Selecting a
Memory Source section for details).
1. go to the MAIN MENU (see Initial Setup section) and press the
button. if compatible video files are available, playback
of the first (if more than one file) will begin.
• The default playback mode is to play from first to last
clip then repeat until stopped.
to play the selected clip.
2. go to the MAIN MENU (see Initial Setup section).
The frame will display a list of supported video clips/files found
on the selected memory source as illustrated below.
to adjust volume.
to select other clips, and use
to pause playback.
to return to the MAIN MENU screen.
to highlight the
icon then press