Standby Button - HP z545 Software Reference Manual

Button Function
Guide Opens the Television Guide.
Recorded TV Opens the Recorded TV window where all your recorded TV programs are stored. From this
window, you can search for and play back a recorded show.

Standby button

The Standby button puts the computer into and out
of a power-reduced state, called standby, which
runs the computer with minimal power until you
give it a command. To take the computer out of standby,
press the Standby button for at least 1 to 2 seconds on the
remote control. It is recommended that you use this button
when Media Center is closed.
An LED (light-emitting diode) located under the Standby
button blinks when the remote control is transmitting a
signal to the remote sensor.
24
Microsoft Windows XP Media Center Edition 2005 Reference Guide
Make sure you turn off the monitor and turn
down or mute the volume; for example, if
you have a scheduled recording in the middle
of the night and don't want to be disturbed.
The HP Digital Entertainment Center will not
automatically go into standby mode if Media
Center is open. It is best to close Media Center
before you manually place the HP Digital
Entertainment Center in standby mode.
n