Removing Files From A Recorded Data Disc; Creating An Image File; Saving An Image - HP z545 Software Reference Manual

Removing Files from a Recorded Data Disc

RecordNow! cannot erase files from recordable
(record once) DVDs or CDs, but files that have been
previously recorded can be removed. When you remove
a recorded file from a data DVD-R, DVD+R or CD-R, the
disc space is lost and cannot be used for new recordings.
To remove data files from a recorded DVD or CD:
1
Click Start, choose All Programs, Sonic
RecordNow!, and then click RecordNow!
again.
2
Select the Data Projects tab.
3
Insert the disc from which you want to
remove files. If an autoplay window opens, click
Cancel.
4
Click Data Disc.

Creating an Image File

RecordNow! can take all the files from a CD or DVD and
convert it into a single file called an image file. You can
use the image file to reproduce the original disc. This is
often used when you need to make multiple copies of the
same disc.

Saving an Image

1
Click Start, choose All Programs, Sonic
RecordNow!, and then click RecordNow!
again.
2
Select the Backup Projects tab.
3
Select Save Image.
150
Microsoft Windows XP Media Center Edition 2005 Reference Guide
5
You must have at least one file on your data
disc to re-record it. Select the file you want
to remove, and then click the Remove icon
in the upper-right corner.
6
Click Yes.
7
Click the Burn icon to save your data disc
without the files you removed.
8
Click Done when the recording is
complete.
4
Insert the source disc into the drive.
5
Click Browse to set the destination and name of the
image file.
6
Click the Save icon to create the image file.