Making a movie with WinDVD Creator
This is the final step of your DVD project. You select a
format, the type of TV system, and volume name.
If your project is already open, click the Make
Movie button and skip to step 5.
Click Start, choose All Programs, InterVideo
WinDVD, InterVideo WinDVD Creator, and
then click InterVideo WinDVD Creator again.
Select the Open existing project button, and then
select your project.
Click the Make Movie button.
Insert a blank recordable DVD or CD into your drive.
Choose one from each of the following sections
(order of selections may differ).
Burn to Disc
Use this to burn directly to a
DVD or CD.
Use this to create the file on
your hard disk drive.
Select the device that contains
the blank recordable DVD
Select the speed to use when
recording your project.
Select one of the formats to
record your project.
Select between NTSC and
PAL for your TV system. The
NTSC format is used in North
America, and the PAL format
is used in European and Asian
Enter a Volume name for your
Click the right arrow, and then click Start.
Importing, Editing, and Burning Videos