Using The Storyboard In Windvd Creator; Identifying Requirements For Capturing Video With Windvd Creator - HP z545 Software Reference Manual

Using the Storyboard in WinDVD Creator

Located on the bottom of the Edit and Add Menu area.
The Storyboard can be displayed in either Menu Picker or
Timeline mode. Use the Storyboard to organize your
media and add special effects such as titles, transition
effects, audio tracks, and video filters.
Identifying Requirements for Capturing
Video with WinDVD Creator
You can copy (capture) video files to your hard disk drive
by using the WinDVD Creator program.
To capture digital video, connect your digital video (DV)
camera to the FireWire ® (IEEE 1394) port on the back
panel of the HP Digital Entertainment Center. To capture
analog video, connect your VCR or analog video camera
to the Composite Video 2 or S-Video 2 connectors on the
front panel of the HP Digital Entertainment Center.
To capture video files, you need to:
1
Connect your video source device properly.
2
Turn your device on and set it to playback mode.
3
Make sure WinDVD Creator can detect your digital
or analog device.
4
If your HP Digital Entertainment Center has multiple
video devices connected, they all appear on the
Capture screen. You must select the video source you
would like to use.
a In the WinDVD Creator Capture screen, click
your input source.
b Click the Wrench icon.
c Select Device Control tab, and then select
your video source from the Video Source drop-
down menu.
n
You may need to turn your digital video
device off and on again for the program to
detect it.
Importing, Editing, and Burning Videos
163