Advertisement
Lightburn Operation Tutorial (For MacOS)
1. Download and install Lightburn software from the website
Note: It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please
download a new version and reinstall.
And Lightburn is a paid software with 1 month free trial, you need to buy the licence key for Galvo version.
1. Down load the software from the website:
https://lightburnsoftware.com/pages/trial-version-tr
y-before-you-buy
3.Copy the folder "EZCAD for ComMarker B6" from the USB
to the desktop
5.Import EZCAD Config and select the folder
2.Find downloaded file Lightburn V1.3.01, and drag
Lightburn icon to the Applications folder
4. A device window will pop out if the software is open the
first time, click "Create Manually", Select "JCZFiber"
Note: Make sure the machine is on and connected via USB
6.Select folder "EZCAD for ComMarker B6"---->" Plug", and
choose "markcfg7" and click "next"
- 13 -
Advertisement
Need help?
Do you have a question about the B6 and is the answer not in the manual?