Care And Maintenance - Dreame MOVA K20 User Manual

How to Use
EN
One-Click Self-Cleaning
1. Place the appliance back onto the base. Ensure that the water in the Clean Water Tank
is su cient for self-cleaning.
2. Briefly press the self-cleaning button on the top of the handle to start/stop self-
cleaning.
3. Empty the Used Water Tank while self-cleaning is completed.
Note: The self-cleaning function can be enabled only when the appliance is being charged and
the battery level indicator is green. If the battery level is lower, please charge the appliance before
starting the self-cleaning.
11 11 11
Care & Maintenance
Tips:
• Turn o the appliance before maintenance. Do not touch the power switch.
• Replace parts if needed. The parts must be replaced by those available from the manufacturer or
its service agent.
• If the appliance is not used for an extended period, fully charge it, unplug the power plug, and
store the appliance in a cool, low-humidity environment away from direct sunlight. To avoid
over-discharge of the battery, charge the appliance at least once every 3 months.
Cleaning the Used Water Tank
1. Press the Used Water Tank release
button to remove the tank.
2
1
3. Rinse the Used Water Tank with water,
the provided cleaning brush can be used
to clean the inner wall of the tank.
Note: The Used Water Tank Cover contains
electronic components. Do not rinse the cover
with water.
Note: It is recommended to clean the Used Water Tank in time after each use, as well as before and
after the self-cleaning.
2. Pull up the tank cover and remove the
filter from the Used Water Tank cover.
1
4. Re-install the filter and the Used Water
Tank cover. Then re-install the Used
Water Tank until you hear a click.
Click
2
1
EN
12 12 12