Data General NOVA 4/C Field Engineering Maintenance Manual page 122

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and software. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
BASIC INPUT/OUTPUT TEST
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found)
DTOS Mnemonic: BASICIOT
Special Machine Requirements: Multi-mode |/O Tester Board No
005-004283
Reference: Listing No. 096-001133
1'<- TOP MEMORY ADDRESS USED> <R>
# <FILE NUMBER OF AIODCH F> <CARRIAGE RETURN>
Lie Note 1
LOADED <-FILE NUMBER OF AIODCH F> <TOP MEMORY ADDRESS USED >
BASICIOT REV. 00 <DATE >
COMPUTER TYPE (O= NOVA 4, 1= NOVA 3, 2= MICRONOVA, 3= ECLIPSE)?
O
HIT (CR) WHEN INTP AND DCHP JUMPERS IN PLACE Note 2
1. The program may output the number of each file which
2. Before entering a carriage return, make sure that the
I/O Tester Board is inserted in an I/O slot, and that the
0-12