System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language
Boot Options
Device Configurations
164
Chapter 5 Computer Setup
To do this
Change the Computer Setup language.
Set a Startup Menu delay (in seconds).
●
Enable/disable Custom Logo (disabled by default).
●
Enable/disable Display Diagnostic URL (enabled by
●
default).
Enable/disable CD-ROM boot (enabled by default).
●
Enable/disable SD Card boot (enabled by default).
●
Enable/disable floppy boot (enabled by default).
●
Enable/disable PXE Internal NIC boot (disabled by
●
default).
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
Enable/disable USB legacy support (enabled by default).
●
When enabled, USB legacy support allows the following:
Use of a USB keyboard in Computer Setup even
◦
when a Windows® operating system is not running.
Startup from bootable USB devices, including a
◦
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
Enable/disable fan always on while connected to an AC
●
outlet (disabled by default).
Enable/disable Data Execution Prevention (select models
●
only; disabled by default). When enabled, the processor
can disable some virus code execution, which helps to
improve computer security.
●
SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:
AHCI (Advanced Host Controller Interface)
◦
IDE (Integrated Drive Electronics)
◦