HP ProBook 6550b Maintenance And Service Manual page 158

Select
Port Options (all are enabled by default)
AMT Options
Set Security Level
Restore Security Defaults
150 Chapter 5 Computer Setup
To do this
NOTE:
All port options are enabled by default.
Enable/disable the Smart Card slot.
●
● Enable/disable the ExpressCard slot.
Enable/disable the serial port.
●
● Enable/disable the parallel port.
Enable/disable the flash media reader.
●
Enable/disable the USB port.
●
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
● Enable/disable the 1394 port.
NOTE:
All AMT options are disabled by default.
Enable/disable Firmware Verbosity.
●
● Enable/disable AMT Setup Prompt (CTRL-P).
Enable/disable USB Key Provisioning Support.
●
Enable/disable Unconfigure AMT on Next Boot.
●
Enable/disable Terminal Emulation Mode
●
Enable/disable Firmware Progress Event Support.
●
Enable/disable include TYPE-131 in SMBIOS.
●
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.