Smart Card Reader - HP ProBook 6550b Maintenance And Service Manual

Smart card reader

Description
Smart Card Reader (factory-installed on select models only)
Smart Card Reader HF (factory-installed on select models only)
Before removing the Smart Card Reader, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
Bluetooth module (see
●
Mass storage device (see
●
Optical drive (see
●
Keyboard (see
●
Switch cover (see
●
Palm rest (see
●
TouchPad (see
●
Display assembly (see
●
Remove the Smart Card Reader:
1. Use a flat-bladed screwdriver (1) to release the hooks (2) on each side of the Smart Card Reader
from the edges of the base enclosure.
2. Press in on the Smart Card Reader (3) to release it from the ExpressCard assembly.
124 Chapter 4 Removal and replacement procedures
Battery on page 72).
Bluetooth module on page
Mass storage device on page
Optical drive on page
Keyboard on page 88)
Switch cover on page
Palm rest on page 98)
TouchPad on page 100)
Display assembly on page
74)
75)
86)
94)
109)
Spare part number
534043-001
622597-001