16.
If it is necessary to replace the WLAN antenna transceivers and cables:
a.
Release the tabs (1) built into the display enclosure shielding that secure the WLAN antenna
cables.
b.
Detach the WLAN antenna transceivers (2) from the display enclosure. (The transceivers are
attached to the enclosure with double-sided tape.)
c.
Remove the WLAN antenna transceivers (3) and cables. The WLAN antenna transceivers
and cables are included in the Display Cable Kit, using the following spare part numbers:
●
●
●
17.
If it is necessary to replace the WWAN antenna transceivers and cables:
a.
Release the tabs (1) built into the display enclosure shielding that secure the WWAN
antenna cables.
b.
Detach the WWAN antenna transceivers (2) from the display enclosure. (The transceivers
are attached to the enclosure with double-sided tape.)
c.
Remove the WWAN antenna transceivers (3) and cables. The WWAN antenna transceivers
and cables are included in the Display Cable Kit, using the following spare part numbers:
●
●
118
Chapter 4 Removal and replacement procedures
583956-001–For use only with computer models equipped with a 15.6-in HD+ display
assembly
589230-001–For use only with computer models equipped with a 15.6-in HD display
assembly
589231-001–For use only with computer models equipped with a 14.0-in HD display
assembly
583956-001–For use only with computer models equipped with a 15.6-in HD+ display
assembly
583230-001–For use only with computer models equipped with a 15.6-in HD display
assembly