Making Connections
Using PC Cards
This section describes how to
Insert a PC Card.
Remove a PC Card.
Select a compatible PC Card from a list of tested cards.
To insert a PC Card
Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0,
make sure you've installed Card Executive (see page 6-18 for instructions).
The OmniBook PC Card slots are available for storing data and expanding the
communication capabilities of the OmniBook. The OmniBook supports standard
Type I, II, and III PC Cards (PCMCIA and CardBus). You can use two Type I or II
cards or one Type III card. Both slots support Zoomed Video, which allows
high-quality multimedia presentations.
1.
. Do not remove a PC Card while the OmniBook is actively reading or
writing data. Hold the card with its face up and its connector holes toward the
card slot.
2. Slide the PC Card into the slot until it is flush with the OmniBook.
4-16