To Install A Second Battery - HP OmniBook 7100 Reference Manual

Managing Battery Power

To install a second battery

The OmniBook's plug-in module bay accepts a second battery. See page 4-4 for more
information about plug-in modules.
When a second battery is installed, the lower triangle appears next to the battery
icon in the status panel.
1. From the Start menu, shut down the OmniBook. (This is not necessary if you are
removing a battery from the plug-in module bay and inserting another battery.)
2. Slide and hold the release latch, then pull out the module, as shown.
3. Slide the front panel of the battery so that it fits into the bay, then slide it into the
module bay until it clicks into place.
3-8