Using The Omnibook Pointing Devices - HP OmniBook 7100 Reference Manual

Using the OmniBook Pointing Devices

Two pointing devices (pointing stick and touch pad) are built into your OmniBook.
The default pointing device driver (PS/2 TrackPoint), supports the enhanced
features of the pointing stick and basic features of the touch pad.
You can customize the OmniBook to support enhanced touch pad features. If you
do this, keep in mind that you are selecting enhanced features for the touch pad
only. You cannot activate enhanced features for both simultaneously.
This section describes how to
Use the built-in pointing devices.
Activate full touch pad capabilities.
Activate full pointing stick capabilities.
Configure pointing devices.
1. Pointing stick (pressure-sensitive pointing device).
2. Touch pad (touch-sensitive pointing device).
3. Click buttons.
Both pointing devices use these click buttons, which work like the right and left
buttons on a standard mouse. What the buttons do depends on the software
being used.
Operating the OmniBook
2-5