To Install A Second Battery - HP OmniBook 4100 Reference Manual

Managing Battery Power

To install a second battery

The OmniBook's plug-in module bay accepts a second battery. See page 4-4 for more
information about plug-in modules.
1. Click the Start button and select Shut Down (this is not necessary if you are
removing a battery from the plug-in module bay and inserting another battery).
2. Slide the module release latch forward as far as it will go.
3. Gently move the release latch back until the module pops out.
4. Grasp the underside of the module firmly, and pull out.
5. With the latch in the open position, slide the battery into the OmniBook until
flush with the unit.
6. Close the module release latch.
3-8