Removal And Replacement Procedures - Compaq Evo N600c Maintenance And Service Manual

5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Both Phillips P0 and Torx T8 screws are removed during
disassembly. There are 37 screws and screwlocks, in seven
different sizes, that must be removed and replaced when servicing
the notebook. Make special note of each screw size and location
during removal and replacement.
Refer to Appendix C, "Screw Listing," for detailed information
on screw sizes, locations, and usage.
Maintenance and Service Guide 5–1