Bios Administrator Password; Managing A Bios Administrator Password - HP EliteBook 8440P User Manual

BIOS administrator passwords
DriveLock user password
TPM embedded security password

BIOS administrator password

The Computer Setup BIOS administrator password protects the configuration settings and system
identification information in Computer Setup. After this password is set, it must be entered to access
Computer Setup and to make changes using Computer Setup.
Note the following characteristics of the BIOS administrator password:
● It is not interchangeable with a Windows administrator password, although both passwords can be
identical.
●
It is not displayed as it is set, entered, changed, or deleted.
● It must be set and entered with the same keys. For example, a BIOS administrator password set
with keyboard number keys will not be recognized if you enter it thereafter with embedded numeric
keypad number keys.
●
It can include any combination of up to 32 letters and numbers and it is not case sensitive unless
mandated by the administrator.

Managing a BIOS administrator password

A BIOS administrator password is set, changed, and deleted in Computer Setup.
To set or change this password in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select Security > Change Password, and then press
enter.
4. When prompted, type your current password.
5. When prompted, type your new password.
6. When prompted, type your new password again to confirm.
7. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
110 Chapter 10 Security
to enter BIOS Setup.
Function
Protects access to the internal hard drive that is protected by
DriveLock, and is set under DriveLock Passwords during the
enable process.
When enabled as a BIOS administrator password, protects
access to the computer contents when the computer turns on,
restarts, or exits Hibernation.
This password requires the optional embedded security chip
to support this security feature.
esc while the "Press the ESC key for Startup Menu"