Warnings; Status Led - dji Osmo Action Multifunctional Charging Handle User Manual

2.4 Warnings

• The product is not waterproof. DO NOT place it in water. Use the charging port
protector, and make sure the USB-C port on the back of the product is firmly
closed.
• Make sure the battery handle is properly insulated to prevent fire hazards. DO
NOT drop or strike the product.
• If there is foreign matter inside the USB-C port, clean with an air blower or soft
brush. Note to sweep outwards from the inside of the port.
• DO NOT pull the coiled cable of the USB-C connector by force to avoid damage.
• Discharge the battery handle to 50% battery level if it is not used for 10 days or
more in order to extend the battery life.

2.5 Status LED

Press and hold the power button to power on the charging handle and check the current
battery level from the status LED information.
The blinking patterns of the LEDs are as shown below:
LED is on
LED is flashing
LED is off
Blinking Pattern
The charging handle is being charged
Osmo Action Multifunctional Charging Handle User Guide
Battery Level
100%
76-99%
51-75%
©
2024 DJI All Rights Reserved.
9