Scan the QR code above to download the latest version of DJI Mimo app. The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version of DJI Mimo is compatible with Android v8.0 and later.
Getting Started Charging To charge Osmo Mobile SE, connect a USB adapter (not included) to the charging port using the power cable. The battery is fully charged when the battery level indicator turns off on the status panel. Charging time: approx. 2 hours and 12 minutes (tested in the environment temperature of 25°...
Page 6
Osmo Mobile SE User Manual 2. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the mobile phone to Osmo Mobile SE. 3. Unfold the gimbal as shown. Press and hold the M button to power on. Osmo Mobile SE will stabilize once the gimbal mode indicator lights up on the status panel.
Using Osmo Mobile SE On-board Features Status Panel Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode. System Status Indicator Descriptions Blinking Pattern Descriptions Solid yellow Bluetooth disconnected Solid green Bluetooth connected Pulses yellow or green Standby mode...
Page 8
Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode. Charging Port (USB-C) Charge Osmo Mobile SE by connecting a USB adapter to this port. 1/4"-20 UNC Port The 1/4"-20 UNC port can be used to attach a tripod.
Page 9
Press the switch button, shutter/record button, and trigger simultaneously for more than one second to reset the Bluetooth name and connection and reconnect. Osmo Mobile SE will be powered off automatically if there is no operation for three minutes in standby mode.
Side Grip Mode Low Position Mode Rotate Osmo Mobile SE to the right or Press and hold the trigger, and then tilt left by 90° to go from Upright to Side Grip Osmo Mobile SE forward to enter Low mode.
Home: tap to return to the home screen. Album: manage and view footage from the phone or DJI devices. Editor: tap to edit photos or videos from Osmo Mobile SE or import and edit from a mobile device. Profile: register or log in to a DJI account. Tap the setting icon to access more settings.
2. Enable Bluetooth on the mobile phone and connect to the device with an OMSE prefix name in DJI Mimo. 3. Users are required to allow access to certain information when using DJI Mimo for the first time. The exact information will be listed in the prompt. An internet connection is required.
Page 13
Osmo Mobile SE User Manual There are three ways to use ActiveTrack 5.0: a. Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject indicates ActiveTrack 5.0 is successfully enabled. Tap the icon on the top corner to stop tracking.
Page 14
Follow Speed: provides Fast, Medium, and Slow follow speed. Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place Osmo Mobile SE on a flat surface using a tripod. Do not touch the gimbal during calibration.